Motul Gear 300 75W-90 1 Liter 100% Synthetic - Ester Based.
 
All mechanical transmission, synchronised or not synchronised gearboxes, gearbox/differential, transfer
gearboxes and hypoïd differentials without limited slip system operating under shocks, heavy loads and
low revolution speed or moderate loads and high revolution speed.
 
STANDARDS
API GL4 and GL5 / MIL-L-2105D
  • 100% synthetic extreme pressure lubricant for an efficient anti wear protection, a better resistance at high temperature and a longer life time.
  • 0% shear loss : Unshearable oil film in extreme conditions.
  • Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 Standard, July 1998 update
  • Very high lubricating power which decreases friction and wear.
  • 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise.
  • Fluid at low temperature to allow easier gear shifting when the gearbox is cold.
  • Less effort required on the gear lever to shift the gears.
  • Suitable for any type of seal and yellow material used in gearboxes design.
  • Anti-corrosion, Anti-foam.
RECOMMENDATIONS
Oil change: According to manufacturers' requirements and adjust according to your own use.
 
PROPERTIES
Viscosity grade SAE J306 75W-90
Density at 15°C (59°F) ASTM D1298 0.900
Viscosity at 40°C (104°F) ASTM D445 72.6 mm²/s
Viscosity at 100°C (212°F) ASTM D445 15.2 mm²/s
Viscosity index VIE ASTM D2270 222
Flash point ASTM D92 200°C / 392°F
Pour point ASTM D97 -60°C / -76°F

(105777)

SKU 105777
Brand Motul
Shipping Weight 1.5000kg
Shipping Width 0.150m
Shipping Height 0.200m
Shipping Length 0.120m
Shipping Cubic 0.003600000m3

More From This Category