Wheel Spacers - 30mm (5x100 PCD)

Sold Out

Calculate Shipping

Local Pickup - $0.00

PERRIN Wheel Spacers move your wheels and tires outwards so they are more flush with the fender--instantly giving your vehicle the perfect stance!


PERRIN wheel spacers feature a ‘perfect fit’ hub-centric design that makes the spacer function as a precise extension of the axle hub, thereby guaranteeing precision wheel fitment.


Constructed from a proprietary aluminum/magnesium alloy PERRIN spacers are engineered, and manufactured by H&R Special Springs in Germany.


PERRIN Wheel Spacers are extraordinarily strong and lightweight. Additionally, they feature a hard anodized coating for surface durability.


Place a straight edge flush with the face of the wheel and tire combination. Make sure the straight edge touches the tire in two spots to keep the straight edge even with the tire. Use the measuring device to measure from the inside of the straight edge to the inner fender lip. (see illustration) Make sure that the measurement is taken at the point where the wheel and tire is closest to the fender. For instance, on a car with a large amount of negative camber the tire and wheel may be closest at the front or rear edge of the fender.


The spacer sizes available on this page are designed for OEM wheel and tire specs but using the measurement method above may work with some aftermarket wheel and tire set ups.


On our BRZ we found that for the best look and fitment, we used 25mm spacers front and rear. Some customers will prefer a 25mm in the front and 30mm in the rear as the BRZ/FR-S has more fender clearance in the rear. On the 2011-2014 WRX we used 25mm spacers in the front and rear.


Recommendations are for OEM wheels and tires.


Brand Perrin
Shipping Weight 8.0000kg
Shipping Width 0.200m
Shipping Height 0.200m
Shipping Length 0.200m
Shipping Cubic 0.008000000m3

More From This Category

Wing Stabilizer (STi 03-07)

Wing Stabilizer (STi 03-07)